Shipped from Spain. 10 days delivery.
Fortuna 9 Sailboat in Marina Punta Lagoa in Vigo (Spain) 2 ELLEBOGEN GTM55 Marine engine mounts (Ref. 856834) Introduction Txema and Bea, a couple living in Vigo, Spain, that share the passion for the Sea. Galicia is in the northwest of Spain, known by the ending of the pilgrimage way of Saint James in Santiago […]
Sailing Vessel Perseverance: Oyster 435 being refurbished by Victor Canela (Sistemas Navales) in Barcelona. The Perkins 4.108 with original mounts, first iteration mounts and Ellebogen GTM mounts. Introduction While engine mounts may appear alike, they do not necessarily deliver identical engine performance. The mounts’ design significantly influences the vertical, horizontal, and longitudinal stiffness since the […]
Multiple ways to lift the marine engine at a glance Introduction In order to avoid the tedious process of dismantling numerous components to lift the motor using a halyard or hoist, sailboat owners typically seek innovative solutions to raise it slightly without causing damage to the oil pan. This article will explore various alternatives for […]
Vessel: Catalina 28 based on a cruise in the Otaha River, Canada. Using two Ellebogen GT-S45 (#120450-06400) and two Ellebogen GT-S55 (#120450-06801) silentblocks Introduction Knowing the load per mount is key for the selection a marine engine mount. For this purpose, we need to know the position of the mounts and the position of Centre […]
Right ‘Zuiderzee’ HL38, sailing on the Dutch coast near Medemblik. 2 marine engine mounts ELLEBOGEN 75 (Ref. 128270-08341) and 2 marine engine mounts ELLEBOGEN 100 (Ref. 128377-08351) The Sailboat was designed by J.K. Gipon and constructed by De Scheepsbouwers in Werkendam. Â The overall length of the boat is 26,24 ft /8m, with a beam of […]
HOW TO IMPROVE ENGINE STABILITY On recreational boats or sailboats, achieving maximum engine stability is often a challenge. There are different factors that must be taken into account: 01. Condition / Performance of the engine 02. Condition of the shaft. Ensure that it is not damaged 03. Condition of the cutless bearing 04. Alignment of […]
4 marine engine mounts ELLEBOGEN GTS40 (Ref. 120450-06201) Brief description of the boat and the engine. The Sailboat was constructed by Gaffers & Luggers, Mylor Bridge, Cornwall. Â The overall length of the boat is 23,6 ft /7,19m with a beam of 8.0 ft / 2.43 m. The displacement of the boat is 11,023 lbs / […]
Boat: Makma 700, cruising through the beautiful Frisian Canals. 2 ELLEBOGEN 75 (Ref. 128270-08341) and 2 ELLEBOGEN 100 (Ref. 128377-08351) The aim of this report is to explain the case of a user of a Yanmar 3GM30 that had high levels of vibration on a Makma 700 and the steps to fix the vibration problem. […]
